High Performance CNC Plasma Cutting Machines / Plasma Cutting
Equipment
Quick Details
- All of our CNC cutting machines can be equipped with oxy-fuel
and/or plasma cutting equipment;
- American Hypertherm, American Thermadyne, Germany Kemper and
domestic plasma sources for options;
- Capacitive height controller and auto-igniter for flame torch;
arc-voltage height controller for plasma torc;
- Australia FASTCAM auto programming and nesting software;
1. Introduction
Developed and designed in-house and tested in practice, we have
produced a series of cutting machines and cutting lines that will
be regarded as industry leading since 2003. All of our CNC cutting
machines can be equipped with oxy-fuel and/or plasma cutting
equipment.
This series CNC flame&plasma cutting machine is developed based
on the plasma cutting technology home and abroad. It can equip the
American Hypertherm, American Thermadyne, Germany Kemper and
domestic plasma sources.
Guoheng earned its global market position by offering extremely
innovative cutting solutions for customers in steel construction,
offshore, shipbuilding, process and crane building industry.
We also provide user-friendly broad choices and options that allow
you to configure your CNC cutting system with the capacities, speed
and accuracy of your needs.
2. Main Parameters
Model | CNC-FP25 | CNC-FP30 | CNC-FP40 | CNC-FP50 | CNC-FP60 | CNC-FP70 | CNC-FP80 |
Drive system | Single side gear and rack driving | Double sides gear and rack driving |
Rail span mm | 2,500 | 3,000 | 4,000 | 5000 | 6000 | 7000 | 8000 |
Valid working width mm | 1,700 | 2,200 | 3,200 | 4200 | 5200 | 6200 | 7200 |
Strip/straight cutting width mm | 80—1,700 | 80—2200 | 80—3200 | 80—4200 | 80—5200 | 80—6200 | 80—7200 |
Rail length mm | 15,000 (valid cutting length 12,5000), fine machining I-rail |
Torch lift stroke mm | 150 |
Flame cutting speed mm/min | 50—1,000 (setting as per cutting technology) |
Fast return speed mm/min | 4,000 |
Flame cutting material | MS |
Flame cutting thickness mm | 6—150 (single torch), piercing thickness≤100 |
Plasma cutting thickness mm | Depend on plasma power source |
Plasma cutting speed mm/min | Depend on plasma power source |
Plasma cutting material | MS, Aluminum, SS |
Intersection point deviation mm | ≤0.5 (800*800 industry standard prescribed figure lineation) |
Diagonal error mm | ≤0.5 (square lineation) |
Power supply | AC380V 50HZ 3P or tailor made |
Above are our standard models and parameters, and it can be
designed and manufactured on request. |
* We reserve the right to alter specifications without prior
notice.
3. Main features
The standard models of our CNC flame&plasma cutting machines
have the following features:
- Robust all steel fabrication with stable structure and good
rigidity, and no deformation after long time using;
- Micro-step SH-2200AH CNC system;
- Capacitive height controller and auto-igniter for flame torch;
arc-voltage height controller for plasma torch
- Australia FASTCAM auto programming and nesting software;
- Both longitudinal and transverse drives adopt Japan Panasonic high
precision A.C. servo motor, Germany NEGUART high precision gear
reducer and high precision gear and rack.
- The brushless AC servo motor has high torque, high resolution and
high inertia.
- Longitudinal rail is fine machining rail. Rack material is 45#
steel, fixed in rail by bolt in sections.
- Advanced PC-Based CNC controller with faster processing speed &
greater accuracy improves productivity. This CNC controller
features a Windows operating system and colored LCD screen.
- Germany IGUS transverse drag chain;
- Limit switch for gantry travel;
- Heat treatment to main welding parts after welding; sand blasting
treatment to main welding parts before painting;
- High intensive heat-resisting gas supply pipe;
- Backfire arrester and solenoid for cutting oxygen for torch;
- All motion parts have lubrication system;
- Main electric elements are ABB/Siemens brands;
- Hand pendant;
- Lifting lug;
- Standard color:
Optional features:
- American HYPERTHERM edge Pro CNC system;
- Spanish FAGOR CNC system;
- American BURNY 10LCD plus;
- Dust collection system for plasma cutting: dry type or underwater
type;
- Triple torch for X, Y, V&K type bevel;
- Powder spray marking function;
4. Plasma power source
Please select the suitable Hypertherm plasma system (made in USA)
according to the following introduction.
1) Hypertherm Plasma Capacity Chart
2) Air Plasma: PowerMax
3) LongLife Air and Oxygen Plasma: Maxpro200
4) HyPerformance Plasma: HPR*XD
5. Reference drawing
7. Comparative advantage
- ISO9000&CE certified;
- Professional and experienced engineer team to ensure the advanced
design about structure and electric;
- Experienced and skilled workers to care for each work flow from
material cutting, welding, grinding to final assembly and testing
to ensure high machine quality;
- Professional and experienced after sale service team to guarantee
quick and satisfied installation, commissioning or service;
- Optimum materials and outsourcings to ensure the best performance;
- Commissioning and testing before delivery;
- Factory inspection is encouraged;
